If you want to make sure that your air conditioning units will be installed the right way and get the guarantee of its efficiency, we can have it done for you. We can do an excellent job.
According to a particular study, more than half of the total energy used in any home goes to cooling and heating. This implies that you must always make concrete decisions regarding your ventilating and air conditioning system. Air conditioners usually work at their best peak with an adequate supporting cast, including sufficient insulation, a duct work that is well-sealed and a properly programmed thermostat. When any of these is compromised, then you are likely to experience a whole load of problems with your HVAC.
So today in this post we want to discuss some few common air conditioning repair problems that you will often experience in your home.
Your air conditioner makes strange noises
Screening sounds which come from the blower are an indication that either you have a broken belt or a motor bearing issues to deal with. In some instances, sufficiently lubricating the oil port will solve this particular problem.
A clicking sound produced when either turning your HVAC on or off signifies a relay problem. On the other hand, rattling noises which occurs when the fan turns the compressor on can either be as a result of loose hardware or a failing motor. You’ll have to contact your local HVAC technician for assistance.
Water is coming from the HVAC
You will have to examine the PVP pipe exiting your HVAC unit as well as the condensate line and see whether they are clogged. If there is water, follow the instructions from your manufacturer and flush it out by using compressed air. Refrigerating leaking from your drain line will make the home feel warm but will cause the build-up of ice over the coils. It is worth noting that air flow issues can equally be as a result of frozen coils. If any component of your air conditioner is frozen, just turn it off and give it time to defrost on its own.
The outside fan is not functioning properly
The outside fan typically conveys the heat from your house to the outside air. So if this outdoor fan is not working properly, adequate transfer of heat will not be achieved, and this implies that the compressor of your HVAC might overheat, tripping the safety overload in the process. Again, it may cause internal damage to your compressor.
Your air conditioner cools air unevenly
As a result of poor insulation, leaks in the duct work or even blocked registers or vents; temperature fluctuations can occur. You should ensure that all the vents in your home are open, clean and free from obstruction. Usually, south-facing windows seem hotter than other rooms. In this scenario, you can install blackout curtains over such windows during the hotter times of the day. Also, you can opt to install separate zoning systems which will allow you to regulate the temperature in specific areas in your house.
Your air conditioner works but, the air is not cold enough
There are cases when your house might feel incredibly warm even when your HVAC is running. You must ensure that the thermostat has the correct setting. Also, if you haven’t replaced the air filter in a few months, it would be an excellent idea to do so. If you set your thermostat correctly, but you can’t see any difference, you’ll have to invest in a new one.
Always inspect the area around your home and ensure that is free from either vegetation or debris. Keep tall plants and bushes at least two feet away from your HVAC unit.
These are just a few examples of air conditioning problems in east Melbourne. As always, without relevant knowledge on how to repair a malfunctioning air conditioner, call your local technician for assistance.
No one wants to reach a cold home in cold weather but this is pretty much what will happen if your heating system breaks down! This is why it’s better to have your heating system seasonally checked by professionals of heating repair Hobart, especially just before the cold season. In addition to this, knowing these heating systems troubleshooting tips can help you nip any problem in the bud.
These are the things you need to do if you find your heating system not working:
While these 6 heating system troubleshooting tips can help you resolve minor problems, it’s always better to play safe with heating systems. If you have any doubt about the system’s working efficiency, call the heating repair Pakenham to take a look at it!
One thing that irks most homeowners is having to deal with a damaged HVAC system smack in the middle of winter. Often, the signs start showing earlier on that your heating system needs maintenance. Most homeowners disregard them or choose to attend to them when it is too late.
One of the ways of making sure that your HVAC system is operating at an optimal rate is by running a heating system flush regularly.
With regular use, sediments accumulate within your heating system and boiler. The result is the diminished performance of your heating system. One way to restore your heater’s optimal performance or maintain it is to conduct a heating system flush.
Sludge or residue occurs when air finds its way in the heating system, which results in the production of iron residue formation within the radiator as well as other parts of the unit. As the sludge level increases, it obstructs normal function of the heating unit.
Whether your system is new or not, it is important to perform a heating system flush. When installed, new boilers or radiators or their parts may result in the formation of sludge/residue build-up.
Including corrosion inhibitors would help in minimising on build up, but a heating system flush will equally do the job.
A heating system flush is done by fastening a magnet filter and Flush Tool into the pipe work of the heating unit.
The only parts that are taken off are the radiator and heat pump. Throughout the complete flush, no other part of the system will be detached.
The Flush Tool forces water to the filters, radiators, pipe work, and coils, and this gathers all iron sludge residue that is then flushed out. A corrosion remover is added, and often it is phosphoric acid. The boiler is switched on, and infrared thermometers are used to find cold locations.
Corrosion is then removed from all regions where cold readings have been identified. pH and TDS Meters are used to examine the water dispelled from the system until it is completely clean.
Once the flushing is complete, the heating system is restored to its working condition.
As discerned, the primary aim of performing a heating system flush would be to remove contaminants from your boiler and heating system.
Some of the other benefits of performing a heating system flush include:
As you can see, it is crucial to schedule a heating system flush to make sure that your unit is working as it should.
Is your home winter ready? Well, don’t worry because we have a breakdown of the heating system maintenance you should undertake to get your home winter ready.
Servicing your heating system is crucial in making sure that you have an optimally functioning unit come winter. It doesn’t take much to perform some of the heating system maintenance tasks, but it is sensible to contract a professional to maintain your HVAC unit regularly.
Here are some of the common heating system maintenance tasks that you can do to keep your unit winter ready.
In as many times as you have heard it, it is important to reiterate that cleaning and change your HVAC unit’s filters. The filters are akin to the chain that links up all parts of the heating system and keeps them functioning as required.
HVAC units are prone to getting clogged up with debris, dirt, and dust. The result is inefficiency in how the heating system works and this in turn results in higher energy usage.
Therefore, your HVAC filters should be amongst the parts that are regularly serviced to keep your heater running as expected.
HVAC ducts play a critical role in ensuring that the unit is functioning efficiently. Estimates have it that 20 t0 30% of heat is lost due to poorly connected elements as well as holes and leaks present in heating systems.
Regular examination of your HVAC ducts can help identify leaks and holes, which you should then get fixed to restore efficiency.
The vents are prone to blockage caused by dust and other debris. Therefore, regular heating system maintenance should also include cleaning of the vents.
It is good practice to keep the vents unobstructed, particularly in units that have baseboard systems or radiators. Position your heating system away from furniture or other objects that may obstruct the vents.
Most homeowners are territorial when it comes to operating their thermostats, and rightly so because it helps to control internal temperatures. Beyond that, thermostat settings play a crucial role in preventing your energy costs from shooting up.
It is best to always keep the thermostat setting at room temperature. During the winter when it gets colder, it is important to try and maintain room temperature settings on your heater. Otherwise, your energy cost rises with every temperature setting that is above room temperature.
While you can perform most of the discussed heating system maintenance tasks on your own, it pays off to get professional services for regular tune-ups.
A professional will be able to perform the essential maintenance requirements as well as pick up on any problems with your unit on time. Making sure all parts are working as required and problematic parts replaced on time will ensure that your heating system is winter ready.
Heating system maintenance shouldn’t be something that is disregarded because it helps to avoid problems with your HVAC unit down the line. Performing the simple maintenance tasks discussed above will help keep your heating system winter ready.
Having handy air conditioning services contacts will save you the agony of finding one during those hot months in Sydney. However, what should you consider when finding an air con service provider? Here are some of the important things to have in mind when hiring the best air conditioning technician.
Whether it is home, business or mobile car air conditioning services that you need most likely you’ll turn to friends and family for referrals. After all, this is someone that you will have to let into your home, place of business or trust to tinker around your car.
Referrals help to take the guesswork out of it by hiring a professional who has a good working relationship with people you know. Find out all necessary information from the person referring including the process of contracting the technician, their price point, and general work ethics.
Even with referrals, it is wise to do some due diligence to make sure that you find the right technicians for you.
The Internet is another great resource when looking for air con technicians as well as carrying out much needed due diligence.
Going online can be a curse in much as it is a blessing because there are thousands upon thousands of air conditioning service listings. However, there are also endless consumer reviews available that can help you narrow down on the perfect service provider.
Most technicians also have websites making it easy to contract them and get quotations for the job at hand.
It isn’t enough to settle for an air conditioning service technician, you have to go the extra mile to carry out checks on them and one of the ways to do this is to ask them for references former clients.
Have a chat or call with their former clients to find out how it is to work with them. Beyond that, you can use the readily available social media platforms to ask for experiences working that particular technician. People will always be willing to recommend the services of a good technician and likewise speak up in the case of wanting services.
Play it forward after working with a technician by leaving reviews on their website or consumer review sites.
Get in on Paper
Once you have gone through the necessary processes of contracting an air con professional, the next step is to formally contract them. It is very important to get it all on paper.
Draft up a contractual agreement with the precise cost of service and length of service indicated. There are contractors who might quote a price or say it will take a specific time to complete the job, but for no apparent reason they end up hiking the cost and taking longer than expected.
Having it all laid down in writing means that the contractor has to stick to the agreed upon terms and also gets protection with regards to timely payment from your end.
In conclusion, finding air conditioning services in Sydney shouldn’t be a stressful process. With referrals, testimonials and consumer reviews to work with you are guaranteed to find the best air con professional you need.
One of the most common reasons technicians are called for local air con repairs is reduced cooling efficiency. While there are a few reasons for an AC to reduce its cooling effects, a clogged filter is usually the culprit.
It’s okay to clean dirty and clogged filters; but at times, it’s better replacing than washing them. If this is the case, you need to choose the right filter for your air handler as different air conditioning systems use different types of filters.
Air filters are important for the air conditioner as it prevents dust and allergens from re-circulating in the air you breathe so that you and your family remain healthy. Moreover, the right, clean air filter in your AC unit can reduce allergy symptoms and also improve your home comfort. These are the different types of air filters available and its individual benefits.
HEPA or High-Efficiency Particulate Air filters are available as standalone units or in commercial HVAC systems. While they effectively remove pollen, dust mite residue, bacteria, pet dander and mould from the airflow, they are not good at capturing smoke and other chemical-related fumes.
These filters use the help of ultraviolet rays to kill surrounding allergens. While they do help at removing mould, viruses, bacteria and yeast from the environment, you need a HEPA filter for removing particulates like dust and dander.
These are standalone filters which do not slide into the AC’s air handler like other filters. They are good for reducing the amount of allergens, irritants, second-hand smoke, chemical fumes and viruses in the air. Ionic filters use the help of negative ions to attract and restrict these harmful particulates but are not effective at removing odours.
Carbon filters use the help of activated charcoal to trap contaminants like smoke and chemical and pet smells but are not that effective at removing bacteria, viruses or particulates. Instead of just using these filters, it’s better using combination carbon filters using other filtration methods of capturing allergens.
Fibreglass filters have fibreglass layers encased in a metal cage. While they do protect the HVAC system’s efficiency, they provide only basic filtration. You need a different filter to remove airborne contaminants.
Pleated air filters
These disposable filters are made of polyester and come in between fibreglass and HEPA filters in terms of efficiency. They effectively filter allergens and particulates in the HVAC systems. Its high-efficiency versions with a high MERV rating are a step better than regular pleated air filters.
Some think they save money buying washable instead of disposable filters. The disadvantage is that cloth fibres cannot capture fine particulates. They are best used in industrial applications for removing larger particulates from the environment.
Importance of air quality in local air con repairs
It’s better to use a combination of standalone and a high-quality HVAC filter for maximum protection of your home from allergens, dust and germ reduction capabilities. If your local air conditioning experts include changing your air filter, it’s better to do so using the help and advice of your AC technician!
Most of us will think that air conditioning unit is only there to provide us with the cool air we need most especially during the summer season. However, it is not the only thing we can get from it. Check out the amazing benefits that we can get from an air conditioning unit.
1. Save numerous lives
The heat of the summer season is not something that we can control. It is unpredictable, and there are a lot of times that the warm climate has taken numerous lives. With the help of an air conditioning unit, there are a lot of lives that has been spared despite the fact that the planet is getting warmer each year.
2. Good air quality
Our world is taking various things to a whole new level and with that comes the pollution that is present wherever we go. Even our homes are not exempted with the toxic air but if you have an air conditioning unit, the quality of air becomes good.
3. Fewer insects and parasites
If you have an air conditioning unit at home, the risk of having uninvited fleas and parasites becomes lower. Even your pets will benefit from the air conditioning unit because the parasites can be kept away from them.
4. Getting better sleep
An individual needs to have the right temperature to get a good night rest. If it’s too warm, we will not be able to sleep, or we can wake up in the middle of the night disrupting our much-needed rest. An air conditioning unit can help us maintain the right temperature in our homes.
If you don’t have an air conditioning unit yet, grab one as soon as possible. Don’t lose out on the benefits that you can get from an AC. It is an investment to make things better for all of us.
Many homeowners opt to do the maintenance of their air conditioning unit on their own. It is not a bad thing most especially if you have an experience in doing so. However, most of us don’t have the luxury to know our way around the air conditioning units. We need to be careful because we can end up breaking it. It is still best if you can let the professionals handle the job. Here are the reasons why it is recommended to get an experienced individual for your air conditioning unit maintenance.
1. Energy Efficiency
We need to remove the notion in our heads that getting the services of a professional to maintain our air conditioning units is just a waste of money. It is the incorrect way to put it because the truth is it can help us save money. If our units are handled by the people, who are considered experts, the life of our units will be longer, and there will be a huge amount of money we can save on our electric bills due to energy efficiency.
2. Air quality improvement
If we get the services of a professional, we can get the assurance that our units are producing good air inside our homes. We should always keep in mind that our family’s health is our priority. It is best for everyone if we can get a good indoor air quality because it can reduce the risk of allergies or even asthma attacks.
3. Minimize repairs
A neglected air conditioning unit can cause more problems. If you have a professional who is checking your units regularly, emergency malfunctions can be avoided. Regular check-ups on your AC are less expensive than hiring someone for repairs, and you would still need to pay for the materials that will be used.
To make sure that you will be able to get the most out of your air conditioning units, it is recommended to get the services of an expert when it comes to AC maintenance.
We all know the convenience an air conditioning unit can provide us, and for us to continue getting that comfort, we need to make sure that we can take care of our air conditioning units well. A brand new unit doesn’t come with a cheap price and to make sure that we can extend the life our AC units, here are some maintenance tips that you can do.
1. Clean the air filters
These days the air filters come in to be reusable and with that being said, it needs to be cleaned regularly to make sure that our air conditioning unit is in top shape. If you do not have the reusable one, just make sure that you can have it replaced from time to time. The air from the unit will decrease if it will be left dirty and full of dust.
2. Check the wirings
Before doing anything, make sure that the power is off to avoid any accidents. Put in mind that you will be dealing with an appliance run by electricity that’s why you need to be careful. Check the wirings if there is any lose cables or excessive pitting. Replace or tighten it only if you have an experience in doing so. If not, contact a professional to do the job to be on the safe side.
3. Observe the thermostat
The air in your home should be closely monitored to make sure that your air conditioning unit is working properly. Check your thermostat to make sure that you can maintain the cold air in your homes. There are older versions of thermostats whereas you need to do things manually, but there are new models that are already programmable to make life easier for you.
Follow these three tips, and your air conditioning unit will surely be maintained the right way.
Even with the promise of an around the clock service from the heating and air conditioning companies, repairs experiences have never been pleasant. Not only do they unexpectedly force you to dig into savings, but can at times cause extreme inconvenience especially with severe breakdowns. Most individuals have, therefore, turned to proper air conditioner maintenance guides to minimise these repair incidences. You too can limit the number of repair calls you make every year by following these simple repair avoidance practices.
Replace the air filter regularly
The air filters bore the brunt of the dust and dirt particles picked with the cool air for circulation. If left to accumulate without adequate cleaning or replacement, the filter can block and cause the conditioner to overheat and eventually breakdown. To avoid filter-related conditioner problems, you are advised to replace your conditioners air filters after every four weeks.
Schedule quarterly or semi-annual AC tune-ups
An AC tune up remains one of the surest methods of avoiding heating and air conditioning problems. A tune up is also relatively cheaper than an actual repair while presenting you with more benefits. For instance, tune ups are vital in identifying impending AC problems and enable their correction before they occur this can reduce the cost of maintaining air conditioning in sydney prices. Additionally, tune ups come in handy in improving the AC’s operational efficiency.
Replacing old heating and air conditioning systems
Just like any other product, air conditioners have a life span after which they start breakdowns are expected to be infrequent. You are thereby advised to change your AC system every ten years to avoid being caught up in the age of obsoleteness, inefficiencies, and constant system breakdowns. Old air conditioners are also believed to less energy efficient and therefore a significant utility liability.
Avoid overusing the system
The biggest cause of AC breakdowns and inefficiencies are system overuse. While the idea of keeping your house temperatures even throughout the day is tempting, you should also remember that such an act only results in the buildup of performance pressure within the AC that usually results in system failure. It is, therefore, recommendable that you turn off the AC during the day when no one is around.
Complement the system with other natural home cooling methods
If you have to remain indoors during hot summer days without overworking the AC system, consider adopting natural coolant methods. For instance, use light-blocking curtains and blinds highly limit the amount of sunlight entering the house. Additionally, you might consider using strategically placing fans around the house to supplement the AC’s cooling effects. When the temperatures in the house are quite high, you may take into account disengaging in services that add more heat to the home such as prolonged cooking.
You stand to gain more through these prevention methods than through actual repairs. In most cases, repairs leave permanent dents and streaks of weakness that continually haunt the efficiency of these conditioners for the rest of their usable life. For this reason, don’t just wait for the AC to fail for you to engage professional service providers. On the contrary, schedule regular maintenance with air conditioning service sydney south and part replacements such as the air filters whose ineffectiveness affect the overall performance of the heating and air conditioning systems.